Phone:
1-800-346-3119

T1 Lines for Enterprise

T1 Lines for Enterprise

The Challenge
A large cable system operator provides service to both residential and commercial customers. While the greatest recent growth in service demand has been for Metro Ethernet, many business customers still require a traditional T1 connection, often to backhaul PBX traffic to the phone network. The cable company needed a way to deliver T1 services over their fiber optic network. And to compete with the telcos and wireless providers, the cable operator needed to keep costs down. Among other things, that meant installing managed equipment to reduce service calls.

The Solution
B&B electronics recommended the iMcV-FiberLinX-II intelligent demarcation module, and the iMcV-T1/E1 module. The iMcV-FiberLinX-II connects a host/remote network over fiber optics. It combines copper to fiber media conversion with a built-in IP stack and integrated troubleshooting features. Advanced features include traffic prioritization and bandwidth VLAN tagging, including extra tagging. Host management traffic is invisible to the remote and customer network. Access to the customer network is not required, guaranteeing end-to-end data integrity.

The iMcV-T1/E1 takes a T1 or E1 signal through a standard RJ-48 connector and converts the signal for single-mode fiber. The T1 signal can travel up to 80 km on the fiber from the cable operator's central office to the customer's location, where it is converted back to copper to provide the customer with a demarcation point.

Why B&B Electronics?

B&B Electronics offers a broad selection of media converters and the support to go with them. The reliable, rugged features built into our media converters reduce the risks and costs of downtime.. Choose B&B Electronics to make installation and maintenance easy and affordable.

The Product: 

iMcV-FiberLinX-II -- Optical Ethernet Demarcation Unit

Media conversion with an advanced feature set for network management and troubleshooting Wide temperature: +32º to +122º F (0º to +50º C); 5% to 95% humidity (non-condensing), 0 - 10,000 ft. altitude

iMcV-T1/E1 -- T1/E1/J1 UTP to Fiber Converters

Convert 1.544 Mbps T1/J1 and 2.048 Mbps E1 copper-based PBX to fiber +32° to +122° F (0° to +50° C); 5% to 95% (non-condensing), 0 - 10,000 ft. altitude

 

 


10/100 Mbps Managed Optical Demarcation Module